Publicité
Les langues disponibles
Les langues disponibles
GB
Installation of light kit 1x/8-II
F.
H.
1. Insert the two connectors of the lamp and the fan firmly together
as shown in Figure A..
2. Press the lamp gently up against the fan switch cover (Figure B.) Screw the lamp with 3
screws into the provided drill holes at the switch cover housing (Figure C.)
3. Connect decorative fob and extension chain as shown in Figure D..
4. Insert and screw the lamp into the socket (Figure E.).
5. Place the lamp glass carefully in the light housing (Figure G.). If needed, set before the
anti-viberation rubber ring over the neck of the glass (Figure F.) Thighten now 3 screws
carefully with the hand (Figure H.).
6. Must To operate the light kit on the fan supply side the cable "L-for light" must be
connected to the phase of the home power net (L).
12
Œ
Ž
G.
Œ
Ž
Ž
Publicité
