Foppapedretti Navicella Classic Notice D'utilisation page 11

Handle adjustment
Press the buttons at the side and adjust the handle into the new position, release the buttons and check
that the handle is locked in place.
Assembling the hood
Line up the pins of the hood and insert them into the slots at the side of the carrycot.
Press downwards, a click indicates the hood has been secured in place.
Fasten the press fasteners of the hood.
To remove the hood, press the lower part of the hood securing pin and at the same time remove the hood
from its slot (fig. 5).
Cover (fig. 6 - fig. 7 - fig. 8)
Fit the cover on the carrycot using the press fasteners (a).
Attach the flaps with the press studs to the hood (b),(fig. 7).
Lift up the front fabric flap of the cover for added protection (c), attach the press studs (fig. 7).
Hood adjustment (fig. 9)
Lower or lift the hood to achieve the required position.
Ventilation (fig. 10)
Lift up one flap, to ventilate the inside of the carrycot.
Internal ventilation
It is possible to adjust internal ventilation by using the lever (A)
Backrest adjustment
To lift or recline the carrycot backrest, press and adjust the lever into the new position.
Make sure the backrest has been secured correctly in place, in the chosen position.
Rocking system (fig. 13 - fig. 14)
Two supporting feet are located in the base; fold them both out to prevent the rocking movement, open
both of the feet inwards to allow the rocking movement.
Both feet must be folded inwards or opened outwards.
CARE AND MAINTENANCE
Check the carrycot regularly and make sure that there are no damaged or worn parts.
Replace the carrycot if there are damaged parts.
Lining
• The fabric parts can be washed following the instructions on the washing label.
• Clean the fabric with water, a mild soap and a sponge.
• Never use abrasive or ammonia, bleach or white spirit-based cleaning products.
• Clean the fabric with a brush rather than washing it.
• Do not store the product if it is still wet and do not leave it in humid environments since mildew may
form.
• Store the product in a dry place.
• Protect the product against weather agents, water, rain or snow; moreover, continuous and prolonged
exposure to sunlight can cause changes in the colour of many materials.
• It is recommended to wash the lining separately from other items.
• Follow the lining washing instructions on the labels.
USING THE CARRYCOT
(fig. 1)
(fig. 2, fig.3, fig 4, fig.5)
(fig. 11)
(fig. 12)
• ENGLISH •
11