Before Using For The First Time; Assembling The Vacuum Cleaner - HAEGER Mercury 600 VC-600.041A Mode D'emploi

English

Before using for the first time

1. Take the vacuum cleaner out of the packaging.
2. Remove the packaging and check that the dust bin and safety filter are
correctly fitted.
3. Clean it with a soft, damp cloth and dry thoroughly. Do not immerse the
vacuum cleaner in water or any other liquid.

Assembling the vacuum cleaner

1. Use the telescopic extension tube
– If there are any hard to reach or narrow areas then the telescopic
extension tube is ideal.
– The telescopic extension tube needs to be fitted into position on the
air inlet followed by the required cleaning accessory.
– Fit the tube onto the main body's air inlet until it clicks into the
position. If need to remove the tube, hold the main body, press the
release knob and remove the tube.
2. Assembling the floor brush
1.
Fit the telescopic extension tube onto the air inlet.
2.
Push the floor brush on to the end of the telescopic extension tube.
3.
Adjust the telescopic extension tube to the required length by
pressing the telescopic extension tube button down and sliding out
the tube.
4.
Select which position on the floor brush is required for the floor type
by pressing the switch forwards or backwards. We recommend
4 Instructions for use