EN 28
Safety
WARNING!
Electric shock hazard!
Incorrect electrical installation or
using a mains voltage that is too high
can result in an electric shock.
−
Only connect the tracker and
the charging cable if the mains
voltage of the power socket
matches that stated on the
label.
−
Only connect the mains
adaptor to an easily accessi-
ble power socket so that the
charging cable can be quickly
disconnected from the mains
supply if it malfunctions.
−
Do not use the tracker if there
are visible signs of damage
or if the charging cable is
defective.
−
If the charging cable is
damaged, it must not be used
again. Replace it in order to
avoid risks.
−
Only charge the battery with
the charging cable supplied.
−
Do not open the tracker casing.
Instead, ensure any repairs
are carried out by specialists.
Contact a specialist workshop.
Warranty and guarantee claims
cannot be made if repairs have
been carried out independent-
ly, or if the tracker has been
incorrectly connected or
operated.
−
Only parts that correspond
with the original device's data
can be used in repairs. This
tracker contains electronic
and mechanical parts that are
essential for protecting against
potential hazards.