Operating Panel; Setting The Time - Blaupunkt 5C90S8990 Notice D'utilisation

OPERATING PANEL

This steam cooker has a modern electronic control system. This enables you to set the cooking
parameters to best suit your needs.

1. Setting the time

When the appliance is plugged in, "00:00" will flash and the alarm will sound once.
1) Press and hold for 3 seconds. The hour numbers will flash.
2) Tap or or move the
number entered should be between 0 and 23.
3) Tap to confirm your entry. The minute numbers will now flash.
4) Tap or or move the
entered should be between 0 and 59.
5) Tap to confirm the clock setting. The clock now flashes The time is set. The appliance will
enter standby mode.
NOTE:
1) If you wish to change the time, repeat steps 1 to 5.
2) If the clock is not set, the appliance will not work correctly.
You can select the operating mode by pressing
The available modes are as follows: Top/bottom heat, hot air, hot air (ECO), top/bottom heat +
circulation, dual grill + circulation, grilling with radiant heat, dual grill with bottom heat, bottom heat +
hot air, defrost, dough process
2. Cooking with top/bottom heat
1) Tap once to activate the top/bottom heat. The default temperature of 180°C will be
displayed and the symbol for top/bottom heat will appear.
2) Tap to set the time.
Tap or or move the Smart Slider
Smart Slider
Smart Slider
.
11
to set the number of hours. The
to set the minutes. The number
to set the cooking time.