Start-Up; Initial Cleaning And Heating - Blaupunkt 5C90S8990 Notice D'utilisation

Important information
The appliance is designed for permanent installation with a three-pole mains cable and may only be
connected by an authorised specialist in accordance with the wiring diagram.
Only a qualified electrician who observes the relevant regulations may replace the connection
cable.
Do not use multiple plugs, socket strips or extensions. There is a risk of fire in the event of overload.
If the plug is no longer accessible after installation, an all-pole disconnector with a contact gap of at
least 3 mm must be provided.

START-UP

INITIAL CLEANING AND HEATING

Remove the protective foil from the front of the steam cooker.
Before using the appliance for the first time:
Remove all accessories and clean the appliance from the inside.
Heat up the oven while empty. New appliances have a typical smell the first time they are
used. The appliance should be heated up once before first use. This will
eliminate the smell and the food will cook faster.
• Wipe the steam cooker with a damp cloth before heating up. This will remove materials that
have accumulated in the appliance or in the packaging material during the packaging process.
• Tap . The appliance will switch on and the main menu will appear on the display.
• Tap to select Hot Air
The recommended temperature will be displayed.
• Increase the temperature to the maximum temperature. This is done using the setting buttons.
• Tap next to the sensor buttons. Heat the empty oven for at least one hour.
Make sure that the room is well-ventilated. Close the door to other rooms so that the smell
does not spread throughout the house.
• Let the appliance cool down to room temperature. Mix a neutral cleaning agent with hot water,
wipe down the appliance with it and wipe it dry with a clean, soft cloth.
Leave the door open until the appliance is completely dry.
.
9