Controls Of Your Beverage Center; Setting The Temperature - Danby DBC434A1SDB Guide D'utilisation Et Soins De Propriètaire

Operating Instructions
CONTROLS OF YOUR
BEVERAGE CENTER
2
1
1. Indicator light illuminates to signify the
cooling mode is currently in operation.
2. Set Temperature Display: Display screen
shows the temperature setting (see 'Setting
the temperature' below)
3. Cabinet Temperature Display:
Display screen shows the current cabinet
temperature.
4. °C/°F : Adjacent indicator light denotes which
scale of temperature is displayed.
SETTING THE
TEMPERATURE
I M P O R TA N T !
In the event of a power fail-
ure, wait 3 to 5 minutes
before restarting.
4
3
5. '
(warmer) in 1° degree increments.
'
temperature (cooler) in 1° degree increments.
6. '|' Switch: Continuous illumination.
'O' Switch: Illumination only when the door is open.
• To switch the display between the Fahrenheit (°F) and Celsius (°C)
scale, depress the
simultanously for approximately five (5) seconds
• The temperature range can be set as low as 39°F (4°C) or as high
as 64°F (18°C) to suit your specific storage requirements. Each
depression of the
the temperature in 1° degree increments within the aforementioned
range.
5
6
5
' Button: Used to raise the temperature
' Button: Used to decrease the
and control buttons
or button will allow you to adjust