Using The Hose Connection - Exquisit LE 2055 wes Mode D'emploi

Operating modes
2.
As soon as the control light is
constantly on, the
dehumidifier will work in the
air circulation mode. The
current air humidity is
indicated in the display.
3.
Press button 20 in order to
select the desired exhaust
stage.
4.
Control light 11 or 20 will
indicate which exhaust stage
you have set.
5.
Press button 23 in order to
select another operating mode
and to terminate the air
circulation operating mode
16.4 Using the hose
connection
ATTENTION
Property damage due to
erroneous operation!
Improper cleaning of the dehumidifier
can lead to damage.
• Please note that the drain
hose attached to the
dehumidifier may not run
above the position of the hose
connector on the dehumidifier.
Otherwise condensation can
flow back into the dehumidifier
and damage it.
Page | 36
Remove the condensation
container from the
dehumidifier as described in
the section on Emptying the
condensation container
Stick the drain hose on the
1
ATTENTION
If you handle the dehumidifier
improperly, you can damage it.
• Switch off the dehumidifier and
unplug it from the mains before
you attach a drain hose to it or
remove one from it.
• You can attach the enclosed drain
hose (29) to the hose connector
(27) of the dehumidifier and thus
drain the condensation from the
dehumidified air (see fig. C). In
this way there is no need to empty
the condensation container (3)
and you can operate the
dehumidifier continuously.
hose connection.
Guide the free end of the
2
drain hose into a suitable
drain ir a suitable
container, into which the
condensed water is
supposed to drain.
Push the condensed water
3
container fully back into the
dehumidifier.