Use - easymaxx XTB30-8 Mode D'emploi

EN
9. Move the control dial (9) to Waschen (wash) and set the timer (1) to 15 minutes. Al-
low the wash cycle to run through once.

Use

CAUTION!
■ Never reach into the spinning drum before it has come to a complete stop.
■ Remove all objects such as keys, small change, etc. from pockets or other places to
prevent any damage to the textiles and the device.
■ Never place clothing into the device which has recently been in contact with solvents
such as benzine.
■ Water that is hotter than 60°C must not be used as otherwise the plastic trough could
be deformed.
■ Make sure that during the wash cycle the discharge hose is always secured vertically
on the suspension device.
■ Do not open the lid of the device during operation.
■ Always remove the mains plug from the plug socket when the device is not in use!
– Always read the washing instructions on the textiles that you want to wash.
– Fine textiles such as wool or silk should be washed in a wash bag or something
similar in order to preserve the fabrics.
– Zip fasteners should always be closed in order to prevent damage to the
material.
– Coarse dirt such as sand, glue, etc. should be brushed off beforehand so that
the discharge fl ow of the device does not become clogged up.
Set-Up, Filling and Connection
1. Place the device on a dry, water-resistant and fl at surface a suffi cient distance away
from fl ammable objects. Please make sure that the device is not accessible to chil-
dren!
2. Attach the discharge hose (3) using the hook to the suspension device (2).
3. Open the lid (7) and fi ll the wash drum (4) with no more than 3 kg of textiles.
4. To fi ll the device with water, you can use either the feed hose or a bucket of water:
Bucket
– Fill the bucket with clear water at a temperature of no more than 60°C.
– Pour the water into the wash drum (4). Make sure that you do not exceed the MAX
marking.
16
10. Drain the water via the discharge hose (3) into a sink or
similar outlet and repeat this process one more time.
The washing machine is now ready to be operated!