Technical Data - BOMANN WA 5018 CB Mode D'emploi

Recipe for waffles
5 egg yolks, 5 table spoons of hot water, 100 g sugar and
1 grated lemon peel should be mixed together until frothy and
then a mixture of 1/2 teaspoon baking powder and 150 g flour
should be stirred in. Beat the 5 egg whites stiff and fold them
into the batter.
You can find further recipes in our recipe books or else you can
use a ready-made baking mix.
Cleaning
WARNING:
• Always pull out the plug from the mains socket before
cleaning and wait until the unit has cooled down.
• Do not immerse the device in water! It could result in an
electric shock or fire.
CAUTION:
• Do not use any wire brush or other abrasive objects.
• Do not use any acidic or abrasive detergents.
Baking Surfaces
• Remove any food residues while they are still warm with a
damp cloth or paper towel.
• Wash off the baking surfaces with a soft sponge and soapy
water; then wipe with clean water and dry thoroughly with
a soft cloth. After drying please apply a thin film of edible oil
to the surface.
Housing
Clean the housing after use with a slightly damp cloth.
Troubleshooting
Malfunction Possible Causes
The device does The device has no
not work. power supply.
The temperature
control is set to
Minimum.
The red power- The power supply
on light does not has been interrupted.
come on.
The waffles are The lid is not cor-
varying degrees rectly attached as too
of brown. little batter has been
poured in.
The batter has You have poured into
overflow. much batter.
28
Malfunction
The waffles are
too light.
The waffles are
too dark.
Model: ......................................................................WA 5018 CB
Power supply: .................................................. 220-240 V, 50 Hz
Power consumption: ........................................................ 1200 W
Protection class: .......................................................................... Ι
Net weight: .......................................................... approx. 1.28 kg
The right to make technical and design modifications in the
course of continuous product development remains reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.
Meaning of the "Dustbin" Symbol
Protect our environment: do not dispose of electrical equipment
in the domestic waste.
Please return any electrical equipment that you will no longer
use to the collection points provided for their disposal.
This helps avoid the potential effects of incorrect disposal on
the environment and human health.
Remedy
This will contribute to the recycling and other forms of reutilisa-
Check the socket
tion of electrical and electronic equipment.
with another device
Information concerning where the equipment can be disposed
and insert the mains
of can be obtained from your local authority.
plug properly.
Set the temperature
control to a higher
setting.
Insert the plug into
the socket.
The device is broken.
Fill in and distribute
the correct amount of
batter.
Fill in and distribute
the correct amount of
batter.
Possible Causes Remedy
The set temperature Select a higher
is too low. control setting.
The level set is too Turn down the
low. control.

Technical Data

Disposal