Eneo 300-A-06 Mode D'emploi page 14

Pin Assignment


3
4
5
Important operating and connection instructions
• Voltage for control inputs: 5 ~ 4V (+0%), Ri = 3.9kOhm
• Max. current of open-collector outlet: 5mA, max. voltage = 4V
• Please use only the original cable (included in delivery).
• Connection may only be carried out by authorized personnel.
• The plug-socket combination (control and power supply) at #774 is only
watertight when plug is fully inserted (IP66).
3.3 Configuration of the 4 pin power socket
Colour Function
white Common ground (GND) for switch inputs  and 3
brown Switch input, switcher external/internal
green Switch input, external ON/OFF
yellow Switch input + (control output for external device)
grey Switch input – (control output for external device)
Pin Assignment Colour
 blue
 brown
3
4 yellow/green
4
Function
Zero
Phase
Not connected
Ground