Mode Button; Auxiliary Input - riptunes AS-1026BT Mode D'emploi

3. To play or pause music, press once.
4. In radio mode, plug AUX cable as antenna. Click once for frequency
auto search. When desired station is found click again to save the
station to the Bluetooth Speaker. Use volume buttons to switch and
choose between channels.

MODE BUTTON

1. Click to switch between radio mode and Bluetooth mode.
PREVIOUS SONG/DECREASE VOLUME BUTTON
1. Press once to go to previously played song.
2. Press and hold to lower the volume.
NEXT SONG/INCREASE VOLUME BUTTON
1. Press once to go to next song.
2. Press and hold to raise the volume.
NOTE: If Bluetooth is not paired with any device, the speaker will go into
"sleep mode". To "wake" the speaker, switch the power OFF then ON
again.

AUXILIARY INPUT

For auxiliary input, plug 3.5mm cable into the AUX input located on the
back of the speaker unit and then the other end of the 3.5mm cable into
your music device. A voice prompt will signal that the connection has
been successful.
CHARGING
• Connect the small end of the micro USB charging cable (included) into
the Micro USB port located on the back of the speaker. Connect the larg-
er end of the cable to your computer's USB port or an AC adapter (not
included).
• The LED indicator will turn red while charging.
• Once the unit is fully charged the red LED will turn off.
–6–