Timbertech RSSR01 Mode D'emploi Original page 43

u A c
se nd ARe
1. Do not force the power tool. Use the correct power tool for your task. The correct power
tool will do the job better and more safely at the rate for which it was designed.
2. Do not use the power tool if the switch is defective. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
3. Disconnect the plug from the power source and/or the battery pack before making any
adjustments, changing accessories, or storing the power tool. Such precautionary measure
prevents the power tool from being switched on accidentally.
4. Store idle power tools out of the reach of children and do not allow persons who are
unfamiliar with the power tool or these instructions to operate the power tool. Power tools
are dangerous in the hands of untrained users.
5. Maintain power tools with care. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool's operation. If
damaged, have the power tool repaired before use. Many accidents are caused by poorly
maintained power tools.
6. Keep cutting elements sharp and clean. Properly maintained cutting elements with sharp
cutting edges are less likely to bind and are easier to control.
7. Use the power tool, accessories and insertion tools, etc. in accordance with these
instructions, taking into account the working conditions and the work to be performed.
Using the power tool for applications which are different from those intended ones can
lead to dangerous situations.
s i
AFety nstRuctiOns
1. Recharge the battery pack only with the charger specified by the manufacturer. A charger
that is suitable for one type of battery pack may create a risk of fire when used with
another battery pack.
2. Use power tools only with specifically designated battery packs. Use of any other battery
packs may create a risk of injury or fire.
3. When the battery pack is not in use, keep it away from other metal objects, like paper
clips,coins, keys, nails, screws or any other small metal objects that can make a connection
from one terminal to another. Short-circuiting the battery terminals can result in severe
burns or a fire.
4. As a result of incorrect use, liquid may be ejected from the battery. Avoid body contact with
the liquid. If contact accidentally occurs, rinse with water. If the liquid gets into the eyes,
seek medical attention immediately. Liquid ejected from the battery may cause irritation
or even burns.
EN
O p t
F OWeR OOls
F B
OR AtteRy
43
/B c
AtteRy hARgeR