Instructions - i-tec MAG1000 Mode D'emploi

Instructions

Working program
Program frequency
Output A/B
Therapy time
Field intensity key
Time set keys TM+/TM-
1) Switch on MAG1000 pressing ON/OFF key
2) Check battery status: if the icon
recharge the unit following the instructions (see chapter "Battery charging");
3) Connect the therapeutic belt (or belts) to the plug A/B on the side of MAG1000;
4) Chose therapy program running through programs menu, using PR+ and PR- keys;
5) Set therapy time using TM+ to increase and TM- to decrease: each program has its own set
therapy time, which can be modified increasing or decreasing it with 5 minutes steps;
6) MAG1000 is now ready for use: the display shows informations about the program in use,
the working frequency (not adjustable), the therapy time, the treatment area (or areas, indicated
by icons near the human body on the display) and field intensity;
7) Press key :a sound signal will advise the therapy starting, the display will show the
flashing icons near human body and the remaining therapy time, while it will be possible to
modify field intensity during the whole treatment, pressing more times IN. key. The relative icon
is positioned on the lower right side of the display, with the indication of the three intensities (low
intensity-one bar, medium intensity-two bars and high intensity-three bars);
IACER S.r.l.
on the upper side of the display is flashing, proceed to
31 di 56
Treatment areas
Field intensity indicator (low,
medium, high)
ON/OFF key
Start/pause key
Programs selection keys PR+/PR-
;
MNPG10 Rev. 06 Ed. 21/03/2010