Amplicom NL 100 Mode D'emploi page 13

Using the NL 100
The NL 100 uses an induction loop system which will
work together with your hearing aid, when set to the T
position, to help you hear sounds more clearly��
1�� Slide the ON/OFF switch to 'ON'�� The green power LED
will light up��
If the power LED turns red, the battery power is low and
you should change the battery as soon as possible��
2�� Switch your hearing aid to 'T' or 'MT' mode��
3�� Adjust the volume using the wheel on the NL 100��
�� Your NL 100 is now ready for use and you can speak to
your callers using the built in microphone��
5�� Slide the ON/OFF switch to 'OFF' at the end of your call to
save battery power�� The power LED will go out��
You can use the product adaptor supplied with your NL
100 to connect to compatible MP3 devices or mobile
phones�� Follow the steps above��
Service−Hotline Germany: Tel. 0180 5 001388, cost via German landline at time of going to print: 14 ct/min., different
costs possible via mobile telephone systems
Using the NL 100
13
GB