Velleman CAMSET15 Notice D'emploi page 4

3. Description
a. Camera Station
1. IR LEDs
2. Speaker
3. Microphone
4. Camera
5. CALL button
6. Terminals (R1 and R2)
b. Monitor Station
1. Handset
2. Standby switch
3. 4" screen
4. MONITOR button
5. Not used
6. UNLOCK button
7. Monitor power indicator
8. Power indicator
9. Unlock indicator
10. Volume
11. Brightness
12. Contrast
4. Wiring
Use 2-pole cables with following specifications:
Cable Length Wire Gauge
1 ~ 15m (incl.) 2 x 0.4mm² (2 x 26 AWG)
15 ~ 28m 2 x 0.5mm² (2 x 24 AWG)
28 ~ 50m 2 x 0.65mm² (2 x 22 AWG)
a) Connect the terminals from the monitor station to the terminals from the PCB (R1 → R1, R2 → R2).
b) Connect L+ and L- to the + and – of the electronic lock.
CAMSET15
Fig. 1
Fig. 2
Fig. 3
4 VELLEMAN