Technical Data - Caratec CEA100G Notice De Montage Et D'utilisation

Caratec Electronics CEA100G gas sensor
Installation scheme
red
black
CEZ101
white
Operation
Press lightly on the top of the device (Caratec icon). The as alarm is activated and
runs an automatic test to verify proper operation. For a good result the LED lights
up briefly and a long beep follows. After this, the sensor technology is calibrated
which is indicated by the illumination of the green LED. After calibration, the green
LED stays on. The self-test lasts for 2 to 4 minutes.

Technical data

Technical data CEA100G
Voltage
Current consumption
> Standby
> Alarm
Volumen alarm
Sensitivity
Conformity
12 VDC - 24 VDC
100 mA
180 mA
80 dB
about 95 ppm EEC
89 / 336EEC, 93 / 68EEC
alarm output (option)
connection AK46xx: blue (J17)
3 2 1
CEA100G
0 - +
5