Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Attach the 1.5" NPT Pipe (300m) to the Ceiling Mount
4
Adaptor and then insert the Decorative Cover. The
Decorative Cover is used for double ceiling installation to
cover the holes. Then wind Teflon tape around the 1.5"
housing screw.
Concrete ceiling
Ceiling board
3
TEFLON TAPE
1.5" NPT PIPE
Decoration Cover
TEFLON TAPE
Housing
Install the Housing in accordance with the installation
5
manual.
After installing the adaptor, apply silicon sealant around the
6
adaptor and between the adaptor and the wall for water
tightness. If the wall surface is uneven, pay particular
attention that no gaps are left.
Product Specifications
Location for use:
Indoors or outdoors
Location for use: Ceiling
External dimensions:
See the diagram
Weight:1.2 kg (including the pipe)
Suitable Temperature range:
- 40°~ 50°C
Suitable Humidity range:
0 ~ 100%
Accessories
1.5" NPT Pipe (length: 300m) ........... 1
Decoration cover ............................... 1
Cable Gland (PG13.5) ........................ 2
1 1/2" NPT PIPE THREAD
GB
4
Publicité
Table des Matières
