Installing Grinder Mounting Bracket - WeldCraft TTG Plus Manuel De L'utilisateur

5-5. Installing Grinder Mounting Bracket

OM-230 915 Page 10
2
1
3
!
Turn off grinder and disconnect
power cord.
.
Bracket and grinder can be
mounted horizontally or vertically.
1 Bracket
2 1/4−20 x 1−/2 Mounting Screw
(Not Supplied)
3 Grinder Mounting Screws
(w/Collar)
Use bracket as a template to mark hole
location on mounting surface. Drill hole
where marked.
Loosen grinder mounting screws.
Align mounting screws with grooves in
bracket opening. Insert grinder in
bracket and rotate until switch is easily
accessible.
Tighten grinder mounting screws.
Tools Needed:
1/4 in.
Torx
804 762