CDVI ERONE AG-FUTURE Manuel D'installation page 6

INSTALLATION MANUAL INSTALLATION MANUEL
AG-FUTURE
GALEO
Illuminated RF Keypad
Automation for sliding gates
Place the plate provided (Fig. 1) at a
distance of 50 mm from the edge of the
gate and perfectly square with angle of 90°.
Before fixing the plate with cement, dowels
or other, pass the cable sheath
by the pre-drilled holes.
Fix securely the rack on the gate, providing a
distance of 2 to 3 mm from the motor
pinion (Fig.3).
Fix the stop plates (Cams G) of the motor
on the rack, (Fig. 4)
Unblocking procedure ( Fig. 5)
1. Insert the supplied key into the special
cylinder and turn the key.
2. Pull the lever up to the stop
6
erone.com
Hole for cable
passage
Counterplate
Remove the upper casing, unscrew the screws A and
remove the cover B, pass the cables in the slot of
the gear-motor (Fig.2).
Blocked
Released
Track
Track
EN
Wheel