Go groove FlexSMART X2 Mini Guide De L'utilisateur page 9

Multi-point support
ACTIVATING MULTI-POINT MODE
1. Plug in the FlexSMART X2.
2. Tune your car radio and the FlexSMART X2 to the same vacant FM station.
3. Enable multi-point mode: Before connecting 1st device, press and hold
To disable multi-point mode: Disconnect all devices from the FlexSMART X2, press and hold
2 seconds until you hear 4 descending tones.
PAIRING TWO DEVICES
1. Hold on the FlexSMART X2 for 2 seconds to enter pairing mode. The
2. Pair device 1 to the FlexSMART X2. When paired successfully, only
3. From device 1's Bluetooth options, disconnect from the FlexSMART X2.
4. Hold on the FlexSMART X2 for 2 seconds to re-enter pairing mode. The
5. Pair device 2 to the FlexSMART X2. When paired successfully, only
6. From device 1's Bluetooth options, reconnect to the FlexSMART X2.
CONTROLLING AUDIO PLAYBACK
1. With two devices connected to the FlexSMART X2, the first user to play audio will have playback control.
2. To switch devices, pause audio on the current device. Then press play on the other device.
HANDSFREE CALLING IN MULTI-POINT MODE
FUNCTION
Answer call on device 1 or device 2
End call on device 1, answer call on device 2
Switch from call on device 1 to incoming call on device 2
Switch between calls on device 1 and device 2
End call
88.1
and for 2 seconds until you hear 4 ascending tones.
and
will be lit.
and
will be lit.
9
and for
will begin flashing.
will begin flashing.
OPERATION
Single press
Single press
Double-click
Double-click
Single press