Backlight - Hama RC 660 Mode D'emploi

Select alarm mode
• Move the ALARM SELECT slide switch
(13) to the WORKING DAY position.
• If alarm 1 or alarm 2 is activated, the
weekday alarm only triggers an alarm on
weekdays (Monday to Friday). ALW (7)
appears on the display.
• Move the ALARM SELECT slide switch
(13) to the NORMAL position.
• If alarm 1 or alarm 2 is activated, the
normal alarm triggers an alarm daily. The
display does not show any additional
indicator.
Note – Alarm mode
Selecting an alarm mode (WORKING
DAY or NORMAL) only has an effect if an
alarm is enabled.
Alarm mode exit/snooze function
• If the alarm is triggered, the alarm symbol
/ will begin to ash and an alarm
will sound.
• Press any button (except the SNOOZE/
LIGHT button (7)) to stop the alarm.
• Otherwise, it will stop automatically after
2 minutes.
Note – Snooze function
While the alarm signal is sounding, press
the SNOOZE/LIGHT button (7) to activate
the snooze function. The alarm symbol
/ and will begin to ash. The
alarm signal will be stopped for 5 minutes,
after which it will sound again.

5.5. Backlight

• If you press the SNOOZE/ LIGHT button
(7), the display will light up for approx.
10 seconds.
6
• The alarm clock is equipped with a twilight
sensor (7) that automatically switches
on the backlight of the display (10) to a
dimmed setting as soon as it gets dark.
• During the day or if there is enough light,
the twilight sensor (7) automatically
switches off the dimmed backlight on
the display.
• Move the SENSOR OFF/ ON slide switch
(11) to the SENSOR ON or SENSOR
OFF position to activate or deactivate the
twilight sensor (7).
Note – Backlight
• We recommend deactivating the
twilight sensor while the clock is
not in use, while it is packed during
travel, etc.
• Continuous use of the twilight sensor
will drain the battery.
6. Care and Maintenance
Only clean this product with a slightly damp,
lint-free cloth and do not use aggressive
cleaning agents. Make sure that water does
not get into the product.
7. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability
and provides no warranty for damage
resulting from improper installation/mounting,
improper use of the product or from failure
to observe the operating instructions and/
or safety notes.