Brief Introduction; Use - MAXXMEE 05010 Mode D'emploi

Professional Curler 5 in 1
■
Never wind the connecting cable
around the device.
■
Use only original accessories from
the manufacturer in order to guar-
antee that there is no interference
that may prevent the device from
working and to avoid possible
damage.

BRIEF INTRODUCTION

Attachments
The items supplied include 5 attach-
ments (2 – 6) for curls of different
sizes (Picture A):
• 9 – 18 mm attachment for ringlets
• 19 mm attachment for corkscrew
curls
• 19 – 25 mm attachment for de-
fi ned curls
• 25 mm attachment for beach
waves
• 32 mm attachment for voluminous
waves
As a general rule, the narrower the
attachment, the tighter the curls.
However, the result also depends on
the structure and length of the hair
and on how long the heat is applied
for.
We recommend that you familiarise
yourself with the device and try out
the different attachments.
Temperature and Application
Time
If the application time is too long or
the temperature is too high, this can
cause damage to the hair, particularly
if the hair is fi ne and dry. Conversely,
the result could be unsatisfactory.
In general:
• high temperature (approx. 230°C)
is suitable for strong hair
• medium temperature (approx. 190
– 210°C) is suitable for normal,
robust hair
• low temperature (approx. 80
– 150°C) is suitable for fi ne or
damaged hair
When you fi rst use the device, try it
out fi rst in an inconspicuous spot to
discover the right temperature and
application time for the hair.
Styling Products
We recommend that you use a heat
protection spray.
If necessary, hair spray or a little hair
gel can be used. However, apply it
sparingly and clean the attachment
after each use (see the "Cleaning and
Storage" chapter).
Avoid using other styling products
before the treatment so that you do
not damage the hair. You should defi -
nitely only ever use hair spray after
using the device!

USE

Please Note!
■
Do not use the device on wet hair.
It must be at least towel-dried!
■
Keep the attachment away from
the face, in particular the eyes.
Also maintain a safe distance
between the head and attachment
of at least 3 – 5 cm.
■
We recommend wearing the glove
which is supplied to protect the
hand if it accidentally touches the
hot attachment during styling.
■
When you place the hot device
down, make sure that it rests on
the stand.
■
Wait until the attachment has
cooled down before detaching it.
EN
13