Technical Data; Assembly; Proper Use; Starting Up - Einhell Royal ES 1000 Mode D'emploi

Anleitung ES 1000_SPK1

5. Technical data

Voltage: 230 V ~ 50 Hz
Performance
Cutting circle
Revolutions n
0
Cutting line
Sound pressure level L
pA
Sound power level, L
WA
Front handle vibration a :
hv
Rear handle vibration a :
hv
Weight
The machine may exceed 85 dB(A). The
operator will require noise protection measures
if this is the case. The noise generated by this
machine was measured in accordance with
prEN ISO 10518.
The value of the vibrations emitted by the
handle was determined in compliance with
prEN ISO 10518.

6. Assembly

Fitting the safety hood
Plug the safety guard (10) on to the long
handle (9) (Fig. 3).
Slide the safety guard in the direction of the
cutting head (Fig. 3).
Tighten the screw (A) and the nut (B) to
secure the safety guard. This is done with
the supplied Allen key (Fig. 4).
Fitting the handle
Plug the handle (6) on to the long handle
(9) (Fig. 5).
Then secure with the screw and fixing
button (7) (Fig. 6).
07.09.2006 14:46 Uhr Seite 17
Fitting the carrying strap
Fasten the hook of the carrying strap (8) to the
clip (A) (Fig. 7).
1000 W

7. Proper use

Ø 35 cm
7520 rpm
The trimmer is designed for cutting lawns and
Ø 2 mm
small areas of grass in private and hobby
82 dB(A)
gardens.
Tools for private and hobby gardens are not
96 dB(A)
suitable for use in public facilities, parks and
3.81 m/s 2
sport centers, along roadways, on farms or in
≤ 2.5 m/s 2
the forestry sector.
5 kg For the tool to be used properly it is imperative
to follow the instructions set out in the
manufacturer's directions for use.
Important! It is prohibited to use the tool to
chop material for composting because of
the potential danger to persons and
property.

8. Starting up

The electric scythe is designed only to cut
grass.
The tool has a semi-automatic line extension
system. Each time you activate the semi-
automatic line extension system, the line is
automatically extended to ensure that you can
cut your lawn with the perfect cutting width at
all times. You can activate the line extension
system with a short tap of the machine against
the ground.
Please note that the more often you activate
the semi-automatic line extension system, the
more the line will wear.
Note:
If the line is too long when you use the
machine for the first time, the surplus end
of it will be cut by the blade on the safety
hood.
GB
17