Publicité
Les langues disponibles
Les langues disponibles
Dear Customer,
We would like to thank you for the confidence you have placed in us by purchasing a Prodipe product
ST1 is a professional condenser microphone for recording which adopts advanced SMT, precision control
circuit with Pressure Gradient Transducer cartridge and a large vapor-deposited gold diaphragm to achieve
high sensitivity, extended frequency response, no crossover distortion and low self noise.
The Zinc-die casting housing is spray printed. Its standard XLR (F) connector matches all kinds of audio
equipment.
ST1 is tailored for broadcasting, television studios, recording studios, stage performances, etc.
Usage:
1. Turn on your amplifier or mixing board and set the volume control to minimum position, To connect
the phantom power to the microphone turning on the phantom switch, accommodate the volume
control from low to high so obtained effect to your moderate level for protected the sauna from
pounding.
2. If the head of the microphone is covered by hand or brought close to the speaker, a howling sound
may be generated. To prevent this, first decrease the volume, then place the microphone so that it is
not pointed to the speaker and that there is a sufficient distance between the microphone and speaker.
3. The sensitivity of cartridge is very fine, Don't do drop. Hit it or apply strong shock to it.
4. To maintain the sensitivity and quality of sound reproducing, avoid exposing it to moisture and extreme
temperatures.
5. The related specification or deployment are subject to change without any prior notice.
Specifications:
•
Element: Pressure Gradient Transducer
•
Polar Pattern: Uni-directional
•
Frequency Response: 20Hz-20kHz
•
Sensitivity: -35dB±2dB (0dB=1V/Pa at 1kHz)
•
Output Impedance: 100Ω±30% (at 1kHz)
•
Load Impedance: ≥1000Ω
•
Self Noise: 15dB A (IEC 581-5)
•
Max. Input SPL: 130dB (at 1kHz≤1% T.H.D)
•
S/N Ratio: 79dB
•
Low Frequency Attenuation: 100Hz/oct 10dB
•
Phantom Power Requirement: 48V DC
Illustrations et photos non contractuelles
Actual product(s) may differ from illustrations/photographs used
Copyright © 2016 IPE Music/Prodipe
Page 6
Publicité
