Cameo MOVO BEAM 200 Manuel D'utilisation page 19

Pan/Tilt Device head settings
Motors
Fan Fan control
Settings
Auto Automatic
Lock locking of
rotary-push
encoder
<=
Pan/Tilt 000–255
Speed
Pan Reverse <=
Normal
Reverse
Tilt Reverse <=
Normal
Reverse
Sensors <=
ON
OFF
Blackout <=
Off
Moving
On
<=
Automatic The fan speed is automatically adjusted to
the temperature in the device head
Normal Reduced maximum fan speed, resulting in
slightly reduced brightness if necessary
Silent Consistently low fan speed with reduced
brightness if necessary
<=
60 Seconds Automatic locking of the rotary-push encoder
after 60 seconds without input. Unlock: Keep
encoder pressed for approx. 5 seconds
No Lock Deactivates automatic locking
000 = maximum, 255 =
minimum speed
Does not reverse pan
direction
Reverses pan direction
Does not reverse tilt
direction
Reverses tilt direction
Automatic position cor-
rection is enabled
Automatic position cor-
rection is disabled
No blackout during
head movement
Blackout during
head movement
19