Repair; Disassembly/Assembly; Exchange Of The Led Lighting - Ninka Qanto Mode D'emploi

EN

8.3 Repair

Repairs on Qanto may be performed by authorised workshops or service
personnel only as special tools must be used. Please contact your special-
ist dealer.
If parts on Qanto are opened, there is a subsequent risk malfunctions.
Such actions void all warranty claims.

9. Disassembly/assembly

Before disassembly and during assembly:
• Remove all weight from the trays
• Always disconnect Qanto before repairs by pulling the mains plug or
by disconnecting the socket from the mains.

9.1 Exchange of the LED lighting

18 - EN
1.
3.
TX20
2.
Qanto_Id_A5_0000.50 65060_EN 26042018