Safety Notices - Ninka Qanto Mode D'emploi

EN

2. Safety notices

• The Qanto kitchen cabinet has been built according to state-
of-the-art technology and recognised safety-related regula-
tions. People can still be injured if the safety notices in these
instructions for use are not observed. Carefully store these in-
structions for use for later reference. If Qanto is passed on to a
third party, these instructions for use must be handed over as
well.
• The non-observance of instructions marked with the "Atten-
tion" pictogram can lead to considerable damage.
• During the installation and use of Qanto, sufficient clearance
for the movement of the lifting system must be observed so
that no risks arise for users and other people in the vicinity.
When Qanto is extended upward and to both sides, a clear-
ance of about 200 mm to other cabinets or shelving must be
observed.
• The lifting system may be operated only with the trays in
place.
• During the installation and operation of Qanto, make sure
that no water can enter the cabinet.
• Appliances that can cause high temperatures (e.g., toast-
ers), high amounts of moisture (e.g., electric kettles) or high
dynamic movement loads (e.g., food processors) must not be
operated on the trays.
• The drive must not be overloaded; for this reason, make
sure that the maximum weight load per tray does not exceed
the total load on any account.
EN - 5
Qanto_Id_A5_0000.50 65060_EN 26042018