Parts - shark Ninja BN700 Série Guide De L'utilisateur

IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
To reduce the risk of injury, fire, electrical shock or property damage,
basic safety precautions must always be followed, including the following
numbered warnings and subsequent instructions� Do not use appliance for
other than intended use�
35 DO NOT open pour spout cap while
blender is operating.
36 If you find unmixed ingredients sticking
to the sides of the pitcher, stop the
appliance, remove the lid, and use a
spatula to dislodge ingredients. NEVER
insert your hands into the pitcher, as
you may contact one of the blades and
experience a laceration.
37 DO NOT attempt to remove the container
or lid from the motor base while the
blade assembly is still spinning. Allow the
appliance to come to a complete stop
before removing lids and containers.
38 If the appliance overheats, a thermal
switch will activate and temporarily disable
the motor. To reset, unplug the appliance
and allow it to cool for approximately
30 minutes before using again.
39 DO NOT expose the container and
accessories to extreme temperature
changes. They may experience damage.
SAVE THESE INSTRUCTIONS
6
ninjakitchen.com
40 Upon completion of processing, ensure
the blade assembly is removed BEFORE
emptying container's contents. Remove
the blade assembly by carefully grasping
the top of the shaft and lifting it from the
container. Failure to remove the blade
assembly before emptying the container
results in a risk of laceration.
41 If using the pour spout, hold the cover
in place on the container or ensure lid
lock is engaged when pouring to avoid
risk of injury.
42 The maximum wattage rating for this
appliance is based on the configuration
of the Stacked Blade Assembly and
the pitcher.
43 DO NOT submerge the motor base or
control panel in water or other liquids.
DO NOT spray motor base or control
panel with any liquid.
44 DO NOT attempt to sharpen blades.
45 Turn off the appliance and unplug the
motor base before cleaning.

PARTS

There are a variety of accessories that are
compatible with this blender series.
NOTE: The top flap of your box shows
the select accessories that are included
with your model.
To purchase more accessories and find
great recipes, visit ninjakitchen.com.
A
Pitcher Lid
B 72 oz.* Total Crushing® Pitcher
C Motor Base
(attached power cord not shown)
D
Stacked Blade Assembly
*64 oz. max liquid capacity.
A
B
C
D
ninjakitchen.com
7