ohmex HET 8015 WIFI Manuel D'utilisation page 71

HET 8015 WIFI
> > Instruction for use
When installation it's over, connect the power plug to the power socket.
Make sure that the supply voltage corresponds with the data
indicated on the appliance nameplate.
- Turn the appliance on by pressing the switch positioned on the side of the appliance
body (1).
CONTROL THROUGH THE CONTROL PANEL (6)
a. " " button
To set heat intensity.
b. " " button
Press the button to set the timer from 1 to 24
hours.
Press the "
decrease (from 1h to 24h in 1 h intervals); the
display shows the selected time.
c. " " button
Press to activate the functions and switches
the appliance to standby.
The room temperature and that selected
appears on the display.
d. " " button
To lock the control panel, keep button "
(4). Keep button"
e. " " button
To set switching on time and to increase temperature.
f. " " button
To set switching on time and to increase temperature.
" key to increase or "
" (d) pressed until
USE
6
" to
a
b
c
" (d) pressed until
turns off to unlock the control panel.
is shown on the display
EN
4
d
e
f
67