Tapp Tapplock lite Manuel De L'utilisateur page 9

Fingerprint Mode
To turn on Tapplock lite, press down once (1) on the
shackle of the lock (power button).The status
indicator light will be white, and your Tapplock
should be ready to unlock with your registered
fingerprint.
If you are having trouble getting to fingerprint
mode, hold down the power button until the status
indicator light turns off, putting your lock in sleep
mode. Then press down on the power button once
(1) to enter fingerprint mode.
** Tapplock lite will automatically enter sleep
mode after 10 seconds of inactivity. This
increases the lifespan of your battery.
9