Tapp Tapplock lite Manuel De L'utilisateur page 11

Morse code Mode
Morse code is a backup access mode. It allows you
to unlock your device using long / short combinations
by pressing down on the shackle of the lock (power
button). Morse code gives you access to your
Tapplock without your fingerprint or your phone.
Follow the on-screen instruction in the Tapplock app
to set up your custom Morse code. The status
indicator will be
indicator will be
Press down on the power button three (3) times to
enter Morse code mode. The status indicator light
will be purple.
If you are having trouble getting to Morse code
mode, hold down the power button until the status
indicator light turns off, putting your lock in sleep
mode. Then press the power button three (3) times
until the status indicator light turns purple.
white for a long hold. The status
blue for a short hold.
11