Precautions; Velcro Fastener Mounting; Screw-Down Mounting - Alpine KCA-420i Mode D'emploi

PRECAUTIONS

On handling the iPod™
The iPod has not been designed to withstand automotive
temperature extremes. Therefore, you should not leave the
iPod in a vehicle for extended periods. Leaving the iPod
inside a vehicle on a moderately hot or very cold day may
damage the iPod. For further details on the iPod's non-
operating storage temperature, please consult your iPod's
documentation.
CAUTION
• Alpine accepts no responsibility for lost data, etc.,
even if data, etc., is lost while using this product.
• Do not leave the iPod in a vehicle for a long time.
Heat and humidity may damage the iPod and you
may not be able to play it again.
Installation

Velcro fastener Mounting

1
Attach the Velcro fasteners.
Attach two Velcro fasteners to the mounting
surface. The rough side should be facing the
adapter.
2
Press the adapter onto the Velcro fastener in
the mounting position.
Remove the backing to the adhesive on the Velcro
strips. Press the adapter on the mounting location.
Velcro fasteners

Screw-down Mounting

1
2
Floor
Using the adapter as a template, hold it in the
mounting location and mark the holes to be
drilled. Before drilling, make sure that there
are no objects that could be damaged behind
the mounting surface.
Drill holes and secure the adapter with the
self-tapping screws (M4 x 14) supplied.
CAUTION
If the iPod connection cable is damaged due to
improperly connecting the iPod, it may result in
iPod failure.
3
-EN