Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SPECIFICATIONS
NEJKS-02 Technical Specifications:
•
Maximum load: 3 tons
•
Color: Red and black
•
Minimum height: 27.5cm
•
Maximum height: 42cm
•
Weight: 2.5Kg / piece, 5Kg total
•
Sold in pairs
NEJKS-03 Technical Specifications:
•
Maximum load: 6 tons
•
Color: Red and black
•
Minimum height: 39.5cm
•
Maximum height: 60.5cm
•
Weight: 4.5Kg / piece, 9Kg per pair
•
Sold in pairs
TOOL USE AND CARE
•
Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work
of a larger industrial tool. The tool will perform better and more safely at the task for which it was
intended. Do not modify this tool or use for a purpose for which it was not designed.
•
Securely hold this tool using both hands. Using tools with only one hand can result in loss of
control.
•
Maintain tools with care. Keep tools clean and in good condition for a better and safer
performance. Follow instructions for lubricating and changing accessories. Inspect tool fittings,
alignment and hoses periodically and, if damaged, have them repaired by an authorized
technician or replaced. The handles must be kept clean, dry and free from oil and grease at all
times. A properly maintained tool reduces the risk of binding and is easier to control.
•
Maintain the label and name plate on the tool. These carry important information. If unreadable
or missing, contact Princess Auto for a replacement.
OPERATION
•
Be sure to insert the fixed pin into hole in the bottom of ratchet
to prevent ratchet from detaching from the frame.
•
Put the jack stands on hard level ground.
•
Adjust height by pulling up on ratchet.
•
Place load on the center of saddle for safety, it is strongly
recommended that lifting means not be removed while jack
stands are supporting the vehicle.
•
Secure ratchet by turning stopper to hold load.
•
Make sure stopper has been securely inserted.
•
Release stopper and let ratchet glide down to the lowest
position when storing the jack stand.
•
If the operator is not fluent in English, the product and safety
instructions shall be read too and discussed with the operator in
the operator's native language by the purchase/owner or his
designee, make sure that the operator comprehends their
contents.
Varan Motors
BCIE SARL, gruuss-strooss 28, 9991 Weiswampach, Luxembourg
T: 00352/26908036 – F: 00352/26908040
NEJKS-02
NEJKS-03
Publicité
Table des Matières
