6....-05-CDP 537 MP3 NEU
Battery Mode (not supplied)
1. Open the battery compartment on the rear side.
2. Insert 2 1.5V AA type batteries. Match the polarities correctly (see the inside of
the battery compartment or the marking on the outside).
3. If the device is not used for a long period of time, remove the batteries to avoid
the „spilling" of battery acid.
4. A battery symbol in the display shows you the remaining capacity of the batte-
ries that are inserted. Always change the battery set completely, do not change
just one battery.
Warning: batteries are not to be disposed of together with domestic wastes.
Dispose of the used batteries at the relevant collection bin or at your dealer's.
Never throw batteries into the fire.
AC Adapter Mode (not supplied)
You can also use the device with an adapter.
1. Insert the AC adapter into a duly installed 230V/50Hz protective contact outlet.
2. Connect the CD player to the AC adapter by connecting the jack of the adapter
into the 4.5V/DC socket.
3. When using an adapter (4.5V DC/600 mA) match the polarities correctly as
indicated on the CD player.
Switch Functions:
Please note that with the exception of the "EQ", "A - B", "PROG", "MODE", "CHAR-
GE" and "ESP" buttons you are able to adjust all the settings both on the machine
itself and on the remote control.
EQ:
CHARGE:
HOLD:
VOLUME:
LINE OUT:
27.09.2004
Commissioning the device
General Operating
There are various types of music genre available
(NORMAL, POP, ROCK, VOICE/SPORT, CLASSIC, JAZZ).
The charging function is activated when connected to an
external mains line. Make sure that there are no batteries in the
battery compartment. Danger of explosion! Use only appropriate
rechargeable batteries!
it blocks the functions of all the device's keys to protect against
their accidental activation. If you press one of the function but-
tons the words "KEY LOCKED" appear in the display.
it sets the volume.
it is used for example to connect the device to a stereo system.
14:46 Uhr
Seite 33
GB
33