Automatic Set-Up; Manual Set-Up - König KN-CL20N Mode D'emploi

How do I start the clock?

Automatic Set-Up

• Insert a battery (LR6, 1.5 V, Type AA) correctly into the battery compartment.
• The second hand will move to the 12 o'clock position, followed by the minute and hour
hand.
• After receiving and processing the radio signal (3 to 12 minutes), the clock will
automatically set itself to the correct time.
• Please do not move the clock during this process.
• If the clock has not set itself after 12 minutes, your reception may be faulty or the signal
cannot be received at the chosen location.
• Repeat the set-up by choosing a different location and press the RESET button.

Manual Set-Up

• Press and hold the M.SET button for 3 seconds to enter manual setting mode.
• Press the M.SET button for 1 second to advance 1 minute.
• Press the M.SET button for more than 1 second to automatically advance the minute hand.
• If the M.SET button is not pressed for 8 seconds the clock is set to the displayed time.
Reset the Clock
• Press the RESET button to reset the clock.
• The second hand will move to the 12 o'clock position, followed by the minute and
hour hand.
• The clock will now start to receive the radio signal.
2
ENGLISH