Switch Pack Mode - OXO Simoun 2 W Mode D'emploi

4.3 Switch Pack Mode

. 8: 8 : 8 : 8
. 8: 8 : 8 : 8
. 8: 8 : 8 : 8
. 8: 8 : 8 : 8
User Manual - SIMOUN 2 [R] W
1. When DMX address is complete, Press Menu button to
enter next level.
2. Tap the Up or Down button causing the Segment Display
shows «s---».
3. Press Menu button to enter Switch Pack mode.
Switch Pack mode consists of Switch On(S-on)
and Switch Off(S-of).
In the Switch On mode, output is turned on and
the fixture lights regardless of DMX signal.
In the Switch Off mode, output is turned off and the fixture
is controlled by DMX signal. When DMX level is less than
40%, the fixture goes out; when DMX level exceeds 40%,
the fixture lights.
4. Tap the Up or Down button to change between Switch On
and Switch Off.
V1.3 05/2018 7/20