TROUBLES
Little drops of water dripping
from the accessories.
No water/detergent is
delivered when the pump
switches both on the
appliance and on the handle
are pressed..
X. Overfilling probes in recovery tank. When the recovery tank is overfilled, the probes (13) will
automatically stop the motor. In this case, you need to restart the appliance.
TROUBLES
Suction is not working.
CAUSES
This condition is normal during
the first minutes of operation;
condensate will form because
of a difference in temperature
between the accessories and
steam.
No water or detergent is in
the tank (15)
X
CAUSES
Recovery tank is full.
41
REMEDIES
The inconvenience is normally
eliminated after a few minutes
of operation; If the trouble is
still there, clean the boiler.
Add more water or detergent.
REMEDIES
Switch off the appliance via
the appliance switches.
Empty the tank, clean the
probes (X), and allow them to
dry.
If the problem persists, contact
your Service Centre.