IMPORTANT NOTES
Your steam/vacuum appliance, like any technical appliance, must be used only in accordance with
the instructions.
Materials such as concrete and masonry debris should not be vacuumed in the presence of moisture,
as these materials may harden inside the recovery tank and cause incrustations that lead to filter
damage and, eventually, to permanent motor damage.
The recovery tank must be cleaned regularly to ensure smooth running of the appliance and for hygienic
reasons (bad odours, etc.),.
Wear suitable protective gear (gloves, masks, etc.) before working on the recovery tank.
Vacuuming will stop automatically when the recovery tank (2) is full-up with dirt and liquids,
and will not be resumed until the recovery tank (2) is emptied and the accessory switch (12)
has been switched off and then on again.
13
X. Overfilling probes in recovery tank. When the recovery tank is overfilled, the probes (13) will
automatically stop the motor. In this case, you need to restart the appliance.
36