Important - Batavia MAXXPACK BT-CLC002 Mode D'emploi

.
English
Note: Make sure the battery and machine are lined up correctly. If
the battery does not slide onto the machine easily, don't force it.
Instead, remove the battery; check the top of battery and the
machine slot are clean and undamaged and that the contacts are
not bent.
Charging the Battery
WARNING: Failure to follow the correct procedure when charging
batteries will result in permanent damage.
1.
2.
3.
4.
Note: Make sure the battery and battery charger are lined up
correctly. If the Battery does not slide onto the battery charger
easily, don't force it. Instead, remove the battery; check the top of
battery and the battery charger slot are clean and undamaged
and that the contacts are not bent.
Battery Charge Level
The battery has a built-in charge indicator. Pressing on the button
(3) to the right will indicate the charge level. The right LED indi-
cates a high charge level and the left a low charge level that will
mean the battery pack will require charging soon.
IMPORTANT: When a low charge level is indicated be aware the
tool may stop operating while using the tool. In some instances
this may be dangerous. It is recommended to always ensure the
battery pack has a good charge level.
8
63630-Charger-Ma-1905-14.indb 8
Plug the charger plug into an electrical outlet. The red LED
indicator (5) on the charger (4) will lighten up.
Slide a battery (1) onto the battery charger (4).
Once charging commences, the red LED (5) will illuminate
and the green LED (6) will flash.
When the battery is fully charged, the green LED (6) will
illuminate.
16-05-19 12:4