Setting Up Your Wego; Rear Wheel Assembly - Firefly WeGo Mode D'emploi

SECTION 10:
SETTING UP
YOUR WEGO
1. Open the frame of the WeGo by
pulling up the handlebar and
placing your foot on the rear axle
tube as indicated.
2. Lift the handle
a click, this will indicate the frame
C
is locked open.
3. Ensure the safety locks are
both engaged.
4. To collapse WeGo pull locking levers
on both sides upwards.
10.1 – REAR
WHEEL ASSEMBLY
1. Lift the pushchair rear axle tube and
insert the rear wheel axle until you
hear a click, this will indicate the
wheel is locked into position.
Repeat for the second wheel.
2. Ensure the wheels are installed
properly before using the WeGo.
To inspect, pull the wheel to make
sure it is locked into position.
A
B
until you hear
D
WeGo User Manual p11
C
D
B
A