Publicité
Les langues disponibles
Les langues disponibles
5. Warnings and other notices on the device
GS-60G, GS-150R
Model type
Laser radiation!
Avoid exposure
to beam.
Production year
Output power
Wavelength
GS-200RG, GS-200RG move
Production year
Output power
Wavelength
Model type
Laser aperture
Laser radiation!
Avoid exposure to
beam.
Laser class 3R
Laser apertures
Laser radiation!
Avoid exposure to
beam.
Laser class 3R
6. Installation and operation
1.
Choose a suitable indoor or outdoor location for your laser light effect.
2.
Installation:
•
For fixed installation: It is possible to use the bracket of the device to
fix it at a wall or object. Use a screw to fix the device. Make sure the
device is properly mounted.
•
For temporary installation: Place the device into the desired position
or use the stake (included in delivery). Open the hex bolt at the broad
end of the stake and attach the stake to the unit by fastening the hex
bolt. Make sure the stake is properly mounted at the device. Stick the
stake into the ground.
3.
Connect the power adapter to the power cable of the device. Connect the
power adapter to mains.
4.
Your laser device starts to project immediately.
5.
Disconnect the device from mains to switch off the laser light effect.
7. Service notes
•
Quick on/off switching of this de-
vice will reduce durability of the
laser diode dramatically.
•
Avoid sharp knocks and shocks to
this device and ensure sufficient
protection during transportation.
Look after your Laserworld pro-
duct.
•
Disconnect the device from the
mains when it is not needed.
•
The devices of the Garden Series
are not meant for professional ap-
plications.
•
Damages on the device caused
by improper handling, neglect
of the safety instructions and
service notes will void warranty.
Publicité
