Kenwood KS-3200EX Mode D'emploi page 5

Connections
The speaker wires and labels of speakers' back panel are color-coded to facilitate connection. Connect each wire to the matching-
colored terminal, as shown in the figure.
Be sure to turn off your amplifier before connecting or disconnecting speakers.
Subwoofer (option)
FRONT FRONT CENTER CENTER SURR BACK SURR BACK
/SW /SW
SPEAKERS SPEAKERS
SUB SUB
WOOFER WOOFER
1. Twist wire's
conductor
1. The speaker system's peak input power is indicated in the specifications. To avoid speaker damage, never run the
speakers at power levels exceeding this limit.
2. This speaker system has a nominal impedance of 8 ohms. To ensure safe and reliable operation, be sure that your
amplifier or receiver is able to work with 8-ohm speakers.
• Never short the (+) and (–) speaker wires together.
• Do not reverse L and R or (+) and (–) connections. Reversal of sides or polarities may result in unnatural, incorrectly positioned
sound.
Right
(–) (+)
Red
SURR SURR
Speaker terminals
(Amplifier or receiver)
2. Push
Front speakers
Center speaker
(–) (+)
Green
Right
Surround speakers
Surround back
speaker
(–) (+)
Gray
(–)
3. Insert the
conductor
➤ Left
(–) (+)
White
Left
➤
(+)
(–)
Blue
(+)
Brown
4. Release
5
EN