Publicité
Les langues disponibles
Les langues disponibles
Installation instructions:
Dismantle the fitting as shown in figs. I and II on page 46.
50
Installation method 1
Drill 50 mm into wall.
Slip box bracket (11) or support ring (13) over the connection
and secure it to the flange. Insert the connection housing with
extension (1) and cap screwed on (10) through the hole and
secure the box bracket (11). Slip the installation and fixation
bracket (12) over the threaded tube and secure to the outside
of the wall.
Bare brickwork
For concealed installations it's to ensure that the
mounting flange is insulated and protected against
twisting.
The connection housing with extension (1) must be
mounted horizontal and right angle to the wall to
ensure a total drainage.
E
49
Publicité
