Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
7. Installation
Proceed as follows when installing the camera.
1.
Select a suitable place to mount the camera where you want to mount the
camera or hide it in an object (e.g. a pack of cigarettes, clock or other
object).
2.
Connect the video cable (recommended cable type: RG58) to the BNC
video out (1) of the camera and to the following connected video unit. The
maximum cable length should not exceed 200 m.
3.
Connect a 12V DC power supply to the power input of the camera (2).
4.
Hold the camera at the location where you want to mount it. Check the
orientation and angle of the camera.
5.
Fasten the camera mount (4) on the camera module using the supplied
screws (3) and change the orientation if necessary.
6.
Fasten the needle eye camera to the selected location using the camera
mount.
15
Publicité
Table des Matières
