Chase Programming - Ibiza LC192DMX-MINI Manuel D'utilisation

3.3.4 Check Program
Action:
1. Press and hold the PROGRAM button until the LED blinks
2. Use BANK UP/DOWN buttons to change Program bank to review
3. Press the SCENES buttons to review each scene individually
3.3.5 Editing a Program
Scenes will need to be modified manually
Action:
1. Press and hold the PROGRAM button until the LED blinks
2. Use BANK UP/DOWN buttons to change Program banks if necessary
3. Select the desired fixture via the FIXTURES button
4. Move faders to adjust parameters to the required setting for the fixture(s)
5. Press the MIDI/ADD button to prepare the save
6. Select a SCENE to store the scene
3.3.6 Copy a Program
Action:
1. Press and hold the PROGRAM button until the LED blinks
2. Use BANK UP/DOWN buttons to change Program bank to be copied
3. Press the MIDI/ADD button to prepare the copy
4. Use BANK UP/DOWN buttons to change the destination Program bank
5. Press the MUSIC BANK COPY button to copy to the new destination. All LEDs will blink to confirm

Chase Programming

3.4
A chase is created by using previously created scenes. Scenes become steps in a chase and can be arranged in any order you
choose. It is highly recommended that prior to programming chases for the first time, you delete all chases from memory. See
Delete All Chases for instructions.
3.4.1 Create a Chase
A Chase can contain 240 scenes or steps. The terms "Steps" and "Scenes" are synonymous.
Action:
1. Press and hold the PROGRAM button until the LED blinks
2. Press the CHASE (1-6) button you wish to program
3. Change BANK if necessary to locate a scene
4. Select a SCENE to insert
5. Press the MIDI/ADD button to store
6. Repeat steps 3 ~ 5 to add additional steps in the chase. Up to 24 0 steps can be recorded.
7. Hold the PROGRAM button to save the chase
3.4.2 Running a Chase
Action:
Press a CHASE button, then press the AUTO DEL button.
Adjust the Chase speed by tapping the TAP DISPLAY button twice at a rate of your choice. Note: The time between 2 taps will set the
chase speed (up to 10 minutes)
3.4.3 Checking a Chase
Action:
1. Press and hold the PROGRAM button until the LED blinks
2. Select the desired CHASE button
3. Press the TAP/DISPLAY button to switch the display to step view
4. Use BANK UP/DOWN buttons to review each scene in the chase
3.4.4 Edit Chase (Copy Bank into Chase)
Action:
1. Press and hold the PROGRAM button until the LED blinks
2. Select the desired CHASE button
3. Select the Bank to be copied using the BANK UP/DOWN buttons
4. Press MUSIC/BANK COPY button to prepare the copy
©Copyright LOTRONIC 2018 LC192DMX-MINI 6