Specific Safety Instructions - Perel Tools PR090012 Notice D'emploi

• Familiarise yourself with the functions of the device before actually using it. Do not allow operation by unqualified
people. Any damage that may occur will most probably be due to unprofessional use of the device.
• When using an extension cord, make sure the wires are at least 1mm². Do not use extension cords on a reel.
• Only use the device for its intended purpose. Using the device in an unauthorised way will void the warranty.
• Always make sure you are in a stable position while using the PR090012.
• Make sure you can never touch water, electricity or gas lines while drilling.
• Do not use the PR090012 in the vicinity of flammable vapours and substances.
• Vibrations can damage the arm-hand system. Keep exposure to vibrations as short as possible.
• Check the voltages marked on the rating plate and verify it matches your mains voltage.

3. Specific Safety Instructions

• Always use cutters with a correct spindle diameter.
• Always use cutters suitable for the speed of the machine.
4. Description
1. ON/OFF switch
2. Handle
3. Router base
4. Locking bolts for
parallel guide
5. Mounting holes for
parallel guide
6. Collet
7. Lock knob
8. Revolver depth stop
9. Locking bolt for
depth stop
10. Depth stop
11. Clamping lever
12. Depth stop scale
13. Speed adjustment
PR090012
4 PEREL