Important; Hepa Filter - Bo Jungle B-Sensy Humi Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14

IMPORTANT

Children or persons with physical, sensory or mental impairments should not be allowed to use this appliance unless they are
being supervised by an adult who is responsible for their safety.

HEPA FILTER

This device contains a HEPA filter (High Efficiency Particulate Air), which retains 99,99% of all particles of pollutants and
allergens in the air that have a size of at least 0.3 µm. It can be used to reduce the effects of or to filter the air from pollutants
such as dust; chemical substances; tobacco smoke; odours such as odours from pets or paint; allergens (animal dandruff, dust
mite, etc.) as well as microorganisms.
AROMA PAD TRAY
This device is equipped with an aroma pad tray. In case you want to diffuse essential oils, such as lavender, eucalyptus, etc.
while using the humidifier, please sprinkle some drops of essential oil on the supplied piece of foam, or on a tissue or piece of
cotton and insert it into the aroma pad tray.
NEVER add essential oils to the water inside the tank, as this will severely damage the machine!
OPERATING INSTRUCTIONS
Warning: before filling the tank of the device with water, turn the power off and unplug it.
1. The working environment for humidifier is when temperature is between 5 to 40 degrees Celsius, and relative humidity is
lower than 80%RH.
2. Use clean water lower than 40 degree ( pure water is recommended)
3. Clean water tank and water flume when use again after a long time.
4. If the machine is used with water filter, it is recommend to soak the filter for 24 hours before 1st use.
BUTTONS INSCRUCTIONS
When Symbol light"%"is on, the digital data means environmental humidity .
When Symbol light"℃"is on, the digital data means environmental temperature.
When Symbol light"H" is on, means the device has set timer, press timer key to see the remaining hours.
Humidity data "%" will be on for 10 seconds,and then temperature data"℃"will be on for 5 seconds,and so repeats .
Power: Plug in the power, there is a beep sound, and the machine comes to the standby mode. Once press this button,
the machine start to work with LED display on. Press this button again, the machine stops working and come to the
standby mode.
Negative Ion: Press this button to start the negative ion function, press again to stop negative ion function。
5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

B200700

Table des Matières