Ce Declaration Of Conformity - GMC GPW165 Mode D'emploi

Technical Abbreviations Key
V Volts
~, AC Alternating current
A, mA
Ampere, milli-Amp
n0 No load speed
Ø Diameter
° Degrees
Hz
Hertz

CE Declaration of Conformity

The undersigned: Mr Darrell Morris
as authorised by: GMC
Declares that
Identification code: GPW165
Description: 1800W Pressure Washer 165Bar
Conforms to the following directives and standards:
• Machinery Directive 2006/42/EC
• Low Voltage Directive 2006/95/EC
• EMC Directive 2004/108/EC
• RoHS Directive 2011/65/EU
• Outdoor Noise Directive 2000/14/EC
• EN60335-1:2012+A11
• EN60335-2-79:2012
• EN62233:2008
• EN55014-1:2006+A1:2009+A2:2011
• EN55014-2:1997+A1:2001+A2:2008
• EN61000-3-2:2006+A1:2009+A2:2009
• EN61000-3-3:2013
Applied Conformity Evaluation Method
2000/14/EC:
Sound Power Level dB (A)
Measured: 78
Guaranteed: 92
Notified body: TÜV Rheinland
The technical documentation is kept by: GMC
Date: 14/05/15
Signed:
Darrell Morris
Managing Director
Name and address of the manufacturer:
Powerbox International Limited, Company No. 06897059. Registered address:
Central House, Church Street, Yeovil, Somerset BA20 1HH, United Kingdom.
432859_Z1MANPRO1.indd 7
, DC Direct current
W, kW Watt, kilowatt
/min or min
Operations per minute
-1
dB(A) Decibel sound level
(A weighted)
m/s Metres per second squared
2
(vibration magnitude)
Specification
Model number:
Voltage:
Power:
Motor:
Pump:
Working pressure (Bar):
Max pressure (Bar):
Working flow rate:
Maximum flow rate
High pressure hose length:
Detergent Tank Capacity:
Inlet water temperature range:
Inlet water pressure:
Protection class:
Ingress protection:
Power cable length:
Dimensions (H x W x L):
Weight:
As part of our ongoing product development, specifications of GMC products may alter without notice.
Sound and vibration information:
According to Machinery Directive 2006/42/EC:
Sound pressure L :
PA
Sound power L :
WA
Uncertainty K:
Weighted vibration a :
h
According to Outdoor Noise Directive 2000/14/EC:
Guaranteed sound power L :
WA
The sound intensity level for the operator may exceed 85dB(A) and sound protection measures are
necessary.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the time of
exposure if necessary. If sound levels are uncomfortable, even with ear protection, stop using the tool
immediately and check the ear protection is correctly fitted and provides the correct level of sound
attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness, tingling and
reduced ability to grip. Long term exposure can lead to a chronic condition. If necessary, limit the length of
time exposed to vibration and use anti-vibration gloves. Do not operate the tool with hands below a normal
comfortable temperature, as vibration will have a greater effect. Use the figures provided in the specification
relating to vibration to calculate the duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to EN60745 or similar international
standards. The figures represent normal use for the tool in normal working conditions. A poorly maintained,
incorrectly assembled, or misused tool, may produce increased levels of noise and vibration.
www.osha.europa.eu provides information on sound and vibration levels in the workplace that may be
useful to domestic users who use tools for long periods of time.
7
GPW165
230V~, 50Hz
1800W
Induction
Self-priming
110
165
5.7L/min
GB
7.1 L/min
8m
1.8L
5-50°C
0.1-4 Bar (1.45-60psi /0.01-0.4Mpa)
IPX5
10m
850 x 320 x 400mm
18kg
75dB(A)
92dB(A)
3dB
< 2.5 m/s²
92dB(A)
12/11/2015 15:04