Aspen Pumps Xtra AX3007/1 Manuel D'installation Et D'utilisation page 9

Operation
WARNING Failure to follow the below precaution could result in electrical
shock, fire or personal injury.
1. The plug must be plugged into an outlet that is properly installed and
grounded.
2. Do not use an extension cord or plug adaptor with this unit.
Before starting the unit
• Select a suitable location, make sure the unit is near to an electrical outlet.
• Install the flexible exhaust hose and the adjustable window slider kit.
• Plug the unit into the correct outlet.
• Turn the unit on.
Heating operation mode (Cooling only model has no heating function)
• Press the MODE button in sequence until the heat display is illuminated.
• Press the "+" and "–" button to set your desired temperature.
• Press FAN button to select the fan speed.
• Press ON/OFF button to start the unit and press it again to stop
Cooling operation mode
• Press the MODE button in sequence until cool is illuminated.
• Press the "+" and "–" button to set your desired temperature.
• Press FAN button to select the fan speed.
• Press ON/OFF button to start the unit and press it again to stop.
9